Portable Appliance Testing GARRETTS GREEN; providing electrical solutions across the West Midlands.
Portable Appliance Testing, or PAT, is a safety procedure that involves a series of inspections and electrical tests to ensure the appliances within a property meet the legal obligations to ensure a high standard of electrical safety.
PAT tests are particularly important in buildings used by employees and members of the public, such as schools, hospitals and office blocks.
To make sure an appliance is safe, all aspects of it will be tested including the plug, the lead and the appliance itself. The work will be carried out by an electrician with the skills and knowledge to complete the testing quickly and safely.
Once the PAT testing is complete, you will recieve a report detailing everything that was tested and whether it recieved a pass or fail. All appliances should have a sticker with inspection date, next test due and the inspector’s signature.
Our electricians are happy to provide any help or advice about the report and any remedial work needed.
Emergency Lighting is the ‘backup’ lighting that kicks in when there’s a power cut to the mains supply which would otherwise plunge a building into darkness.
It must be properly designed, installed, maintained, and tested by qualified electricians in order to meet regulations.
At Able Electric Birmingham Testing, our expert engineers take the worry out of the whole process for you by ensuring that your systems are up to date, up to standard, well maintained, and above all, provide the required level of safety for your employees and customers in the event of an emergency.
You can break emergency lighting down into three main categories:
When people need to leave a building in an emergency and the power has gone out, such as in the event of a fire, emergency lighting covers all escape routes. The aim is safely to guide people to their nearest exit via lit escape routes.
This applies when power has failed, but it’s not an emergency situation. Emergency safety lighting is enough for people to remain in areas of a building while power is restored, but it’s not enough to carry on working.
This is backup lighting that is activated during a power cut to a level that allows work to continue. This has to be 100% of the normal lighting as a standby measure.
Almost all commercial properties, including workplaces, retail, leisure, and public buildings (and some domestic properties) need some form of emergency lighting and there are different requirements relating to different categories of buildings.
Risk assessments are usually necessary to determine what level of emergency lighting system is needed.
All emergency lighting needs to be regularly tested by qualified electricians in accordance with safety standards. This is to ensure it is working correctly, compatible with fire safety systems, and continues to meet regulations – for example, if you’ve redesigned or refurbished your premises, the chances are your emergency lighting systems will need to be altered accordingly.
Various tests are required daily, monthly, and annually, including checks of individual luminaires and exit signs and of central battery systems.
Rules and regulations around emergency lighting have toughened up in recent years and the legal obligations for installing emergency lighting systems now carry the same importance as fire alarm systems.
Relative legislation includes the Regulatory Reform (Fire Safety Order), the Health and Safety at Work Act, Building Regulations, and the EU Workplace Directive.
Emergency lighting regulation is covered by a variety of British Standards at each stage of the process, including general advice about the provision of emergency lighting (BS 5266-1:2016), the specified illumination (BS EN 1838: 2013), minimum requirements for the provision and testing of emergency lighting for different premises and various product standards (BE EN 50172:2004/BS 5265:2004).
YEARS FOR BUSINESSES
FOR TENANTED PROPERTIES
A periodic inspection is an inspection and associated testing to check whether an electrical installation is in a satisfactory condition for continued service.More information on EICR can be found here
Periodic inspection and testing should be carried out only by electrically competent persons, such as registered electricians that EICR Testing can provide across the United Kingdom. Contact us for your free information pack.
On completion of the necessary inspection and testing, an Electrical Installation Condition Report will be issued detailing any observed damage, deterioration, defects, dangerous conditions and any non-compliances with the present-day safety standard which might give rise to danger.
★★★★★ Great service - would highly recommend. Would use again.
I own an old Victorian warehouse which has been turned into a storage unit in Walsall. We needed an EICR inspection for our insurance company. I called 3 other companies out but not one of them was interested in doing the job. I think the size and age of the building was putting them off but Jon from Mr Electric seemed motivated by taking on such a difficult task.
David Munns 4 reviews 2 months ago- Fantastic result when they carried out my EICR test on my premises in Sutton Coldfield they spotted that we were supplying the next unit to us with all their electricity for their lights. We have claimed back thousands and now have far cheaper bills to boot.
After spending months searching for someone who could provide reliable information regarding EICR; I luckily found wordpress-867584-3000317.cloudwaysapps.com a company based in Birmingham employing only fully qualified NICEIC electricians.
Whatever the level of testing you require, I am sure that EICR Testing will not let you down. They provided our business in Coventry with fantastic levels of service after another company had let us down.
We trust wordpress-867584-3000317.cloudwaysapps.com for all our testing requirements.
All electrical installations deteriorate through age and constant use. Eicrtesting.com recommend premises should be inspected and tested at regular intervals to check whether they are in a satisfactory condition for continued use. Such safety checks are commonly referred to as ‘periodic inspection and testing’ Fixed Wire or EICR Testing
For more information click here.
Eicrtesting.com a Birmingham based company recommend Periodic inspection and testing should be carried out only by electrically competent persons, such as NICEIC registered electricians. They will check the condition of the electrics against the UK standard for the safety of electrical installations, BS 7671 – Requirements for Electrical Installations (IET Wiring Regulations).
Eicrtesting.com based in Birmingham will send a fully qualified Testing Electrician who will establish the overall condition of all the electric installation and tell you whether it is satisfactory for continued use as well as detail any work that might need to be done. This remedial work will be graded upon importance.
For more information click here.