YEARS FOR BUSINESSES
FOR TENANTED PROPERTIES
Advice from EICR Testing Telford. While there is no legislation that specifically says homeowners, businesses or landlords should have an EICR certificate, laws such as the Landlord and Tenants Act (1985) and Health and Safety at Work Act (1974) outline the responsibilities that landlords and employers have with regards to the safety of tenants and employees respectively. The Electricity at Work Regulations 1989 also require that precautions are taken against the risk of injury sustained from electricity used in work activities.
Electrical installations are not immune to the process of ageing, deterioration and even general wear and tear. For this reason, an EICR should be conducted at regular intervals. British Standard BS 76719 (IET Wiring Regulations) recommends the following intervals for businesses, landlords and homeowners:
Businesses – employers are recommended to have an EICR test undertaken once every five years.
Buy-to-let or rented property – landlords should have an EICR test done every five years or when new tenants enter the property.
Homeowners – an EICR is recommended every 10 years. If the property has a swimming pool, this should be tested once every year.
An EICR will check if your property’s electrics have any faults that cannot be identified through a visual check. A number of faults may occur, such as electrical circuits being overloaded or overheating during use. If any electrical circuit is not properly installed – for example, without earthing or bonding to safely secure the electrics – it may potentially cause a fire or shock hazard. EICR testing will identify any defective electrical work within the system.
A visual check can also be performed to give you a quick analysis of how safe your property is. This will look for broken sockets and light switches, damaged cables and scorching / burn marks as a result of overloading the power outlet. It will also look at the residual current device (RCD) for the circuits that operate the bathrooms and gardens. It is recommended that this visual check is completed at regular intervals in between the more in-depth EICR tests.
After the test has been completed, the testing engineer will produce a certificate for you. It will detail any damages, deterioration, defects or other dangerous conditions. It will also highlight anything that doesn’t match the present day safety standards and things that might put people at risk. Should the EICR test come back as negative, the EICR will be classed as “unsatisfactory” meaning that the required work needs to be done, without delay, to remove the risk to those living or working at the property. As well as returning an “unsatisfactory” result, the report will detail which electrical system(s) failed the test. Work required is classified using the following codes:
C1 – ‘danger is present’, risk of injury is likely and immediate action is required.
C2 – potentially dangerous and remedial action is needed urgently.
C3 – improvement to your electrical system is recommended. C3 is the only classification code that can appear on a report and still pass the EICR test.
Once your electrical system has passed the inspection fully and any urgent remedial work has been completed, you will be provided with an EICR Certificate of Safety, giving you peace of mind that your electrics are safe.
For more information about an EICR for your business or home,
7 great reasons why more people every day choose Able Electric
No Call out Fees
Highly Trained Staff
Install Repair Maintenance
Emergency Lighting Testing Company Able Electrical advice: Emergency Lighting is the ‘back-up’ lighting that kicks in when there’s a power cut to the mains supply which would otherwise plunge a building into darkness. It must be professionally designed, installed, maintained and tested by qualified electricians in order to meet regulations. At ABLE ELECTRICAL Birmingham Testing, our expert engineers take the worry out of the whole process for you by ensuring that your systems are up to date, up to standard, well maintained and above all, provide the required level of safety for your employees and customers in the event of an emergency.
Info Regarding Emergency Lighting
You can break emergency lighting down into three main categories:
Emergency escape lighting
When people need to leave a building in an emergency and the power has gone out, such as in the event of fire, emergency lighting covers all escape routes. The aim is safely guiding people to their nearest exit via lit escape routes.
Emergency safety lighting
This applies when power has failed, but it’s not an emergency situation. Emergency safety lighting is enough for people to remain in areas of a building while power is restored, but it’s not enough to carry on working.
This is back-up lighting that is activated during a power cut to a level that allows work to continue. This must be 100% of the normal lighting as a standby measure.
Who requires emergency lighting?
Almost all commercial properties, including workplaces, retail, leisure and public buildings (and some domestic properties) need some form of emergency lighting and there are different requirements relating to different categories of building.
Risk assessments are usually necessary to determine what level of emergency lighting system is needed.
Emergency lighting testing procedures
All emergency lighting needs to be regularly tested by qualified electricians in accordance with safety standards. This is to ensure it is working correctly, compatible with fire safety systems and continues to meet regulations – for example, if you’ve redesigned or refurbished your premises, the chances are your emergency lighting systems will need to be altered accordingly.
Various tests are required daily, monthly and annually, including checks of individual luminaires and exit signs and of central battery systems.
What are the Emergency Lighting rules and regulations?
Rules and regulations around emergency lighting have toughened up in recent years and the legal obligations for installing emergency lighting systems now carry the same importance as fire alarm systems.
Relative legislation includes the Regulatory Reform (Fire Safety Order), the Health and Safety at Work Act, Building Regulations and the EU Workplace Directive.
Emergency lighting regulation is covered by a variety of British Standards at each stage of the process, including general advice about the provision of emergency lighting (BS 5266-1:2016), the specified illumination (BS EN 1838: 2013), minimum requirements for the provision and testing of emergency lighting for different premises and various product standards (BE EN 50172:2004/BS 5265:2004).
How long should emergency lights be tested for?
It is really important that emergency lights are given a full rated duration test every year. That means if the emergency lights back up should provide 3 hours of illumination (which is often the case), they need to be tested for the full 3 hours to ensure they’re still working at the end of the test.
A periodic inspection is an inspection and associated testing to check whether an electrical installation is in a satisfactory condition for continued service.More information on EICR can be found here
Periodic inspection and testing should be carried out only by electrically competent persons, such as registered electricians that EICR Testing can provide across the United Kingdom. Contact us for your free information pack.
On completion of the necessary inspection and testing, an Electrical Installation Condition Report will be issued detailing any observed damage, deterioration, defects, dangerous conditions and any non-compliances with the present-day safety standard which might give rise to danger.
If you require EICR Testing, feel free to telephone one of our EICR experts who are always on hand to help with your enquiries.More information on costs can be found here
★★★★★ Great service - would highly recommend. Would use again.
I own an old Victorian warehouse which has been turned into a storage unit in Walsall. We needed an EICR inspection for our insurance company. I called 3 other companies out but not one of them was interested in doing the job. I think the size and age of the building was putting them off but Jon from Mr Electric seemed motivated by taking on such a difficult task.
David Munns 4 reviews 2 months ago- Fantastic result when they carried out my EICR test on my premises in Sutton Coldfield they spotted that we were supplying the next unit to us with all their electricity for their lights. We have claimed back thousands and now have far cheaper bills to boot.
After spending months searching for someone who could provide reliable information regarding EICR; I luckily found wordpress-867584-3000317.cloudwaysapps.com a company based in Birmingham employing only fully qualified NICEIC electricians.
Whatever the level of testing you require, I am sure that EICR Testing will not let you down. They provided our business in Coventry with fantastic levels of service after another company had let us down.
We trust wordpress-867584-3000317.cloudwaysapps.com for all our testing requirements.
All electrical installations deteriorate through age and constant use. Eicrtesting.com recommend premises should be inspected and tested at regular intervals to check whether they are in a satisfactory condition for continued use. Such safety checks are commonly referred to as ‘periodic inspection and testing’ Fixed Wire or EICR Testing
For more information click here.
Eicrtesting.com a Birmingham based company recommend Periodic inspection and testing should be carried out only by electrically competent persons, such as NICEIC registered electricians. They will check the condition of the electrics against the UK standard for the safety of electrical installations, BS 7671 – Requirements for Electrical Installations (IET Wiring Regulations).
Eicrtesting.com based in Birmingham will send a fully qualified Testing Electrician who will establish the overall condition of all the electric installation and tell you whether it is satisfactory for continued use as well as detail any work that might need to be done. This remedial work will be graded upon importance.
For more information click here.
Lichfield Road Industrial Estate,
Phone: 01827 230999